Looped Wire Screens
Looped Wedge Wire is made from round wire which is first looped at regularly pitched intervals and then pressed into a deep wedge shaped section. The loops themselves are pressed so as to produce at each side accurately sized spacing shoulders which butt together when the wires are assembled. The width of the slot apertures in the finished panel is determined by the difference between the width of the top face of the wedge profile and the width over the spacing shoulders. The individual Wedge Wires are built into panels by feeding cross rods of suitable diameter through the loops of the wires.
The whole is then clamped together and made secure. The finished sieve is therefore a grille made up of cross rods supporting profiled wires with loops.
- Looped Looped Wire screens provide the perfect solution to vibratory applications that require high strength both laterally and transversely.
- Wires are looped around a supporting cross rod and compressed to fit snugly.
- Slots can be manufactured to 0.005”.
- Looped Wire is used in the following industries; Brewing, Pulp and Paper, Chemical, Mining and Aggregate and Waste Water, and more.
- Supplied in both straight and deep arch design.
- Deep arch design provides several advantages to a straight wire, especially in a dewatering sieve application:
- Concentrates the liquid at the low point of the arch and away from the support bars.
- Reduces blinding (clogging).
- Self-cleaning due to the side way movement of the liquid.
- Higher retention rates.
- Increased flow capacity.
|
Profile Bar Screens / Flat Panel Screens
Our high quality profile bar screens are recommended for use in any application that requires strength, abrasion resistance and efficient liquid-solid separation.
- Profile Bar screens are used in Petrochemical, Fish Diversion, Pulp & Paper, Waste Water, Food, and Architectural industries.
- Wire widths starting at .030”.
- Manufactured slot openings from 0.005”.
- Standard in 304 stainless, available in 316 stainless and Nitronic 32 stainless.
Our high quality custom built flat panel screens, manufactured either framed or unframed with a variety of support rods, offers a high strength, long lasting, economical solution to the market. They come in commonly shaped wedge wire profiles and offer good screening efficiency across a wide range of applications. Flat wedge wire screens are excellent for use to de-water, de-slim, drain and rinse, wet classify, dry classify, filter, dry and cool. They are recommended for use in any application that requires efficient liquid-solid separation.
- Flat Panel screens are used in Petrochemical, Fish Diversion, Pulp & Paper, Waste
- Water, Food, and Architectural industries.
- Resistance welded to offer high strength, small slot openings and large open area
- Wedge wire widths starting at .030”.
- Manufactured slot openings from 0.005”.
- Standard in 304 and 316 stainless.
|
|
|
|
<< Start < Prev 1 2 3 4 5 Next > End >>
|
|
Page 3 of 5 |
